Engineered to international standards for safety, speed and durability on every job site.
Overview
The Aluminum Beam 165 - also called an aluminum beam 165mm or aluminum I-beam - is a lightweight structural I-beam used in formwork, shoring and scaffolding support. With a 165 mm profile height and a weight of only 4.5 kg per metre, it gives crews a strong, stable spanning member that is still light enough to lift and position by hand.
Key Features
Lightweight 165 mm aluminum I-beam
Only 4.5 kg per metre running weight
High moment of inertia for long formwork spans
Stronger and lighter than equivalent steel beams
6061-T6 / 6082-T6 aluminum alloy
Mill finish or anodized surface options
Easy to cut, drill and connect on site
ISO 9001 quality with FOB Shanghai delivery
An aluminum beam 165 is a deep I-section member made from high-grade aluminum alloy. The 165 mm profile height provides the section modulus needed to support formwork slabs, soffits and scaffold spans across longer distances than a standard tube or ledger could manage, while the aluminum alloy keeps the running weight down to just 4.5 kg per metre. That makes it far easier to handle, transport and reposition on site than an equivalent steel beam. ACE SCAFFOLD aluminum beams are manufactured under ISO 9001 quality with FOB Shanghai delivery.
The Aluminum Beam 165 is a lightweight structural I-beam built for formwork, shoring and scaffolding support. With a 165 mm profile height and a running weight of only 4.5 kg per metre, it delivers strong, stable spanning performance while staying light enough to handle by hand.
165 mm I-Section Profile
The 165 mm deep I-section gives the beam a high moment of inertia for long spans and heavy slab loads. The flanges and web distribute load efficiently, so the beam stays flat and safe under wet concrete or stacked platform loads.
section drawing for aluminum beam165
4.5 kg Per Metre
At just 4.5 kg per metre, the beam is a fraction of the weight of an equivalent steel section. Crews can carry, cut and place it without heavy lifting gear, which speeds up erection and reduces site handling risk.
Lightweight Aluminum Construction
Made from 6061-T6 or 6082-T6 aluminum alloy, the beam resists corrosion and is easy to drill, connect and reuse. Mill finish or anodized surfaces are available depending on the site exposure and appearance requirements.
Packing & Shipping
Beams are bundled, wrapped and strapped for export, then loaded to keep the 165 mm profiles straight and protected through long ocean freight from Shanghai.
Aluminum Beam 165 packing
Aluminum Beam 165 Specifications
Description
Height
Unit Weight
Aluminum Beam 165
165 mm
4.5 kgs/m
Frequently Asked Questions
Q
What is an Aluminum Beam 165?
An Aluminum Beam 165 is a structural I-beam with a 165 mm profile height, used in formwork, shoring and scaffolding support. It is made from high-grade aluminum alloy for a strong yet lightweight spanning member.
Q
How much does the beam weigh?
The Aluminum Beam 165 weighs only 4.5 kg per metre, a fraction of the weight of an equivalent steel I-beam of the same strength.
Q
What is the profile height?
The beam has a 165 mm profile height. This deep I-section gives it the bending resistance needed for long spans and heavy slab loads.
Q
What aluminum alloy is used?
ACE SCAFFOLD aluminum beams are made from 6061-T6 or 6082-T6 aluminum alloy for strength, light weight and corrosion resistance.
Q
Why use an aluminum beam instead of steel?
Aluminum offers a much better strength-to-weight ratio. At 4.5 kg per metre, the beam can be lifted and positioned by hand, which speeds up erection and reduces the need for cranes or heavy lifting gear.
Q
What finish options are available?
Mill finish and anodized surfaces are available. Anodizing gives extra surface protection and a cleaner appearance for exposed or long-term applications.
Q
Where are aluminum beams used?
They are used to support formwork slabs and soffits, shoring frames, scaffold spans, table form soffits and any temporary structure that needs a strong, lightweight spanning member.
Q
Can the beam be cut to length on site?
Yes. The aluminum I-beam can be cut, drilled and connected on site with standard tools. Contact us for connection details and maximum span guidance.
Q
How are aluminum beams connected?
Beams connect to formwork frames, drop heads and scaffolding with standard couplers, clamps or purpose-made connectors. A competent engineer should design the support layout for the applied loads.
Q
Do aluminum beams meet construction standards?
ACE SCAFFOLD aluminum beams are manufactured under ISO 9001 quality management and are suitable for use in formwork and shoring systems compliant with EN 12810 / EN 12811, ANSI, AS/NZS 1576 and OSHA when designed by a competent engineer.
Q
Can I order custom lengths or surface treatments?
Yes. ACE SCAFFOLD offers OEM/ODM services including custom lengths, drilling, surface treatments, packaging and labeling. Contact us with your project requirements and quantity.
Q
What is the difference between the 165 mm and 450 mm aluminum beam?
Both are aluminum structural beams. The 165 mm beam is lighter (4.5 kg/m) and suited to standard formwork and shoring spans, while the 450 mm beam is a deeper, higher-capacity member for wider spans and heavier loads.
